Kreg Tool KREG-KMS7200 Precision Band Saw Fence

Description

Most band saw blades don’t run perfectly perpendicular to the front of your table. There’s always just a little bit of drift that prevents you from getting precise cuts even when you are using a fence. The Kreg Precision Band Saw Fence easily adjusts to your blade’s drift angle to provide you with a new level of band saw accuracy. This fence mounts to most 14in (356mm) band saws right out of the box and can be modified to fit many others by drilling a single hole in the aluminum mounting rail.\r\nNever before has a band saw fence allowed you to accomplish such a wide variety of cuts. This fence adjusts both for blade drift and perpendicularity to the blade (essential when cutting thin veneers). In addition, the fence can be quickly changed to a low-profile position to allow the blade guides to be moved closer to the workpiece. Plus, the fence can accept re-saw guides or Kreg Stops for use in additional applications.\r\nThe aluminum fence is incredibly strong, straight, and built to last for years to come. The face and top of the fence contain T-slots for adding stops, re-saw guides, and more.\r\nWhen you don’t need the fence, remove it in seconds—no tools required! Just loosen the locking knob and lift the fence from the mounting rail, which is located below your table’s surface so it won’t get in the way.\r\nMagnified and easy-to-read for even the smallest adjustments, the thin red line on the Precision Lens Cursor lets you accurately set up the fence for cutting veneer, tenons, and more.\r\nThis fence is unique in that it adjusts to set up perfectly square to your table and blade. Two simple adjustments allow you to set the fence to match blade drift, greatly enhancing cutting accuracy.\r\nFeatures\r\n\r\nAdjusts to blade drift angle\r\nFits most 14in (356mm) band saws\r\nCan be modified to fit most any band saw\r\nAllows for blade drift and perpendicularity\r\nCan be changed to low-profile position\r\nFence accepts re-saw guides or Kreg Stops\r\nPrecision Lens Cursor for exact measurements\r\n\r\nSpecifications\r\n\r\nPrecision Lens Cursor Allows exact measurements for precise cuts\r\nBlade Drift 2 simple adjustments compensate for blade drift\r\nDimensions \r\nMounting Rail is 26in (660 mm) long\r\nFence is 18in (457 mm) long\r\nFence Material Aircraft-grade Aluminum\r\nFinish Anodized for easy clean-up\r\nAdaptability \r\nPre-drilled holes on the mounting rail fit most 14in (356 mm) band saws\r\nCan be modified to fit most any band saw\r\nWeight 8.75 lbs\r\n\r\nIncludes \r\n\r\nMounting rail and hardware\r\nclamp block with Precision Lens Cursor\r\n(1) Kreg Heavy-Duty Trak\r\nadhesive-back measuring tape